A function on a watch that will make a sound or vibration at a pre-set time.
An altimeter measures altitude, or height above sea level. Recording ascent and descent, an altimeter watch is an important piece of equipment for climbers, walkers, mountaineers and, of course, aviators.
A display that shows the time both by hour and minute hands (an analogue display) and by numbers (a digital display). This is also known as duo display.
A watch that uses hands and a dial to tell the time.
A small opening found in the dials of some watches in which certain indications are given, such as the date or moonphase.
Auto repeat countdown timer
A countdown timer that resets itself as soon as the preset time has elapsed and starts again. The countdown is repeated continuously until the stop button is pushed.
An automatic watch is a mechanical watch that typically has a balance wheel escapement which automatically winds the watch in response to the movement of the wearers arm. In other words, the wearer's movement winds the watch up. Automatic watches can be stored on a winder to rotate the watch when it's not being worn. They may gain or lose a few minutes per month. If not worn for a few days they will stop.
A self winding mechanical watch. The oscillating weight moves around under the influence of gravity as the wearerï¿½s wrist moves. As this weight moves the mainspring is wound. Originally invented by Abraham-Louis Perrelet in the 18th century, and refined by many other manufacturers since.
Winding that occurs through movement of the wearer's arm, rather than by turning the winder. A rotor turns in response to motion, winding up the watch's mainspring. An automatic watch that is not worn for a day or two will wind down and may need to be rewound by hand to get it started again. This is also known as self-winding.
A very fine spring in a mechanical watch that causes the recoil of the balance wheel. The adjustment of its length regulates the timekeeping. This is also known as the hairspring.
The part of a mechanical watch movement that oscillates, dividing time into equal segments. This is the regulating mechanism that controls the watch's timekeeping accuracy.
A drum that holds the mainspring in a mechanical watch. The toothed rim of the barrel drives the train.
The ring on the outside of the watch case, around the dial, or the rim that holds the watch glass. It may have calibrated markings, especially on sports or divers watches, or be made of precious metal, and sometimes set with precious stones.
Bi-directional rotating bezel
A bezel that can be moved clockwise or anti-clockwise. It is used for keeping track of elapsed time, or a different time zone.
The metal strap that goes around the wearer's wrist. A watch bracelet is often made up of flexible, separate links that can be removed to adjust the bracelet's length.
Branded Watch Movements
Branded Quartz Watches. Seiko Kinetic: Seiko use an innovative movement that responds to the wearer's wrist motion, storing energy and maintaining quartz accuracy. A power reserve indicator shows exactly how much energy you've created. Citizen Eco-Drive: Light powered, developed by Citizen, the Eco-Drive system converts natural and artificial light into energy to give quartz accuracy. They can store power for up to 5 years.
A part that is fixed to the main plate to form the frame of a watch movement. All other parts are mounted inside the frame, giving them freedom to turn.
A function that indicates day of the month and sometimes day of the week and the year. This usually has to be adjusted manually at the end of months with 28, 29 or 30 days. A Perpetual calendar adjusts the calendar automatically to compensate for the short months.
The model reference of the watch movement.
This refers to an arched or curved dial or bezel.
The housing that contains a watch's parts. Stainless steel is most commonly used although titanium, platinum, gold and silver can also be found. Less expensive watches are often made of brass and plated with gold-coloured or silver-coloured metals. Some cases are also made of coloured resin.
A watch that tells the time and acts as a stopwatch. The timing element can be stopped and started without interfering with the ability to tell the time. There are many different types. Some have a centre seconds hand which keeps time on the watch's main dial. Some use smaller subsidiary dials or a digital display to show elapsed time. A chronograph used in conjunction with specialized scales on the watch face can determine speed and distance. Some can time more than one event at one time.
A watch that has been vigorously tested in various positions and temperatures to ensure that it meets high standards of accuracy demanded by COSC, the official Swiss chronometer testing Institute. To be called a chronometer, the mechanical movement must achieve an average rate of between -4/+6 seconds per day.
A watch function other than timekeeping. These include chronograph, perpetual calendar, tourbillon and minute repeater. A watch with any additional function is called a complicated watch.
This allows the wearer to know how much of a pre-set time has passed. Some sound a warning a few seconds before the pre-set time has elapsed.
The grooved button on the side of the watch case, used for setting the hands on a watch, and the day and date, where applicable. It is also used for winding the mainspring of a mechanical watch. The crown is also known as a winder, and can in some cases be screwed down to make a watch water-resistant.
This is the clear cover on the watch face (dial). It may be made of glass, plastic, mineral crystal or sapphire crystal (a scratch-resistant synthetic material). Its purpose is to protect the watch face.
A watch that shows the day and the date, either through apertures in the dial, or by hands on sub dials.
A coloured or shaded band on a world time that shows which time zones are in daylight and which are in night-time.
This refers to two curved strips of hinged metal on a watch with a strap that fastens the strap tightly to the wrist. It tends to be a feature of quality watches. This clasp effectively makes the strap into a Leather bracelet.
This is similar to a deployment buckle but refers to a fastening on a metal watch bracelet.
This is the dial of the watch, showing the time with the numbers or minutes marked on, that the hands show the time against.
A watch that shows the time in numbers, or digits, rather than hands and a dial. Liquid crystal display (LCD)is commonly used.
A watch that shows local time and the time in at least one other time zone, often home time if travelling abroad.
A display that shows the time both by hour and minute hands (an analogue display) and by numbers (a digital display). This is also known as anadigi display.
Elapsed time rotating bezel
A graduated rotating bezel that is used to keep track of periods of time. The bezel can be rotated so the wearer can align the zero of the bezel with the watch's minutes or seconds hand. The elapsed time can then be read off the bezel, rather than the wearer having to perform a subtraction necessary if he used the watch's regular dial.
Electronic Watch Movements
As with the mechanical watches, electronic movement comes in a variety of forms. Quartz and electronic watches: They are driven by an electrical charge (from the battery) which makes a small piece of quartz vibrate at a set frequency to regulate the time. Most modern electronic movements use something called a piezolectronic effect on a tiny quartz crystal to make it vibrate, which in turn drives the mechanism and allows the watch to keep extremely consistent time, typically only gaining or losing 10 seconds per month. The principle is significantly less complicated and therefore cheaper to manufacture than mechanical or automatic movements.
This is a centuries-old craft that, today, involves the use of antique machines to engrave delicate patterns on metal watch components, including cases, dials, bezels and movements. It is also known as guilloche when covered with enamel.
This is the end-of-life indication in quartz battery powered watches. The seconds hand will move in 5 second steps.
The device in a mechanical movement that controls the rotation of the gear train and impulses the balance wheel at regular intervals.
A seconds hand on some chronograph watches that can be used to measure time lapsed or determine the finishing times for several race competitors. It is a function also known as Rattrapante.
The system of gears which transmits power from the mainspring of the watch to the escapement.
A layer of gold that is plated onto a base metal case or bracelet, using electroplating, to enhance its looks. The thickness of the plating is measured in microns (1000th of a mm).
A watch with a grand complication has at least three functions, or complications, in addition to timekeeping. Often chronograph, minute repeater and day & night together.
The science of time measurement, encompassing the art of designing and constructing watches.
An hour indicator on an analogue watch dial or bezel, used instead of numeral.
A bracelet that is shaped and attached to the case of a watch in such a way that it appears to be part of the watch, with the lines of the case smoothly continuing into the bracelet.
Synthetic ruby gemstones that act as bearings for the gear trains, reducing friction and wear.
A function in a chronograph watch that allows the wearer to time segments of a race. At the end of a lap, the timer is stopped and then returns to zero to begin timing the next segment.
Liquid crystal display
Liquid crystal display (LCD) watches show a numeric display continuously by means of the liquid held in a thin layer between two transparent plates. The numbers are made up from seven segments that form the number 8 when all are activated. They are activated by an electronic impulse.
The arms of the watch case that hold the strap or bracelet.
The base plate upon which all other parts of a watch movement are mounted.
The coiled spring which provides the power to drive a mechanical watch movement.
There is something classic and enjoyable about interacting with a well made watch and a more traditional watch wearer might enjoy the contact that comes with winding up their watch. However, you do have to remember to wind your watch up every day and even when doing so they can gain or lose up to 10 seconds per day. Hand-wound watches store energy in reserve so you can take it off but typically not for more than a day or two
A highly accurate mechanical or electronic timekeeper that is enclosed in a box and is used for determining the longitude on board a ship. Marine chronometers with mechanical movements are mounted on gimbals so they are always in the horizontal position that is essential for their precision.
A feature that allows the wearer to convert one type of measurement into another. It usually consists of a graduated scale on the bezel or dial.
This is the traditional watch movement. A mechanical watch is driven by a slow release of power from a mainspring via a set of small toothed wheels. The spring is wound up manually.
This is a thousandth of a millimeter and is a measurement used for the thickness of gold plating.
A function on a watch that sound the time in hours, quarters or minutes.
An indicator or hand on a watch which indicates the phases of the moon through 29 ½ days. Some moonphase watches incorporate a correction for the extra 44 minutes per month.
Mother of pearl
The iridescent interior of a freshwater mollusc, that is often used to decorate watch dials. Its colours include milky white, blue and pink. Each piece is completely unique.
A watch that can perform different functions, such as a stopwatch or a countdown time, whilst still giving the correct time.
A watch that automatically takes into account variations in the length of the month and leap years, and alters the calendar accordingly.
Platinum is one of the rarest and most durable of precious metals. It doesn't tarnish and has a radiant, beautiful white lustre. It is a popular choice for prestigious watches set with gemstones.
Power reserve indicator
A feature of some mechanical watches which indicates how much longer the watch will operate before it needs to be wound again. It is also known as the Reserve de Marche.
A scale on a chronograph which is used for measuring pulse rate.
A button that is pressed to work a watch function such as a chronograph and an alarm. It can also be a corrector for a day/date/month indicator.
The slice of synthetic quartz crystal within a quartz movement watch. When an electric current is passed through the quartz it oscillates. It oscillates at the rate of 32.768 hertz, the circuit measures this and uses the vibrations to regulate the time.
This is an electronic watch movement with a quartz crystal that oscillates when a current is applied to it. The power to run the watch is normally provided by a battery or a capacitor. A quartz movement is generally more accurate than a mechanical movement.
A seconds hand on some chronographs that can be used to measure time lapsed or determine the finishing times for several race competitors. Also known as a flyback hand.
A regulator watch/clock shows hours and minutes and seconds on separate dials, or sub dials, each with individual hands.
A bezel around the watch that can be rotated. It has various timekeeping functions.
This is the oscillating part of an automatic watch that winds the mainspring.
A crystal, the cover that protects the watch face, made of synthetic sapphire - a transparent, scratch resistant substance.
Screw down crown
A crown which screws down into a threaded tube to aid a watch's water resistancy.
Second time zone indicator
An additional dial that can be set to the time in another time zone. This allows the wearer to know the time in two zones simultaneously. Usually referred to as a GMT function.
A resilient bearing which takes up the shocks received by the watch's balance staff and protects its pivots from damage when knocked or dropped.
A watch's ability to withstand an impact equal to that of being dropped onto wood floor from a height of three feet.
A watch case with a transparent front or back, allowing visibility of the watch's movement.
A device consisting of a scale on the outer edge of a watch case which enables mathematical calculations.
Solar powered batteries
Batteries in a quartz watch that are recharged via solar panels on the watch dial.
Split seconds hand
This refers to two hands - a flyback (rattrapante) hand and a regular chronograph hand. Both hands move together but, to time laps or finishing times, the wearer can stop the flyback hand while the chronograph hand continues. This, in effect, splits the hand in two.
A durable metal alloy that is almost rust resistant and rarely corrodes or discolours and, therefore, is highly suitable for watch case and bracelets. It is sometimes used on the case backs of watches made of other metals.
A watch with a seconds hand that measures intervals of time. When a stopwatch is incorporated into a watch, both the stopwatch and the standard watch are called a chronograph.
The part of a quartz analogue movement that moves the gear train and in turn moves the watch's hands.
Sterling silver is a highly reflective precious metal, which is 92.5% pure and is often used in ladies watches.
Also known as subsidiary dial. A small dial on a watch face used for purposes such as indicating the date or keeping track of elapsed time.
A certificate of origin – a mark that identifies that a watch has been assembled in Switzerland and has components of Swiss origin.
A watch can only be said to be Swiss-made if its movement was assembled, started, adjusted and controlled by the manufacturer in Switzerland.
A set of markings on the bezel or chapter ring of a watch which measures the wearer's speed over a known distance. This is used in conjunction with the chronograph seconds hand.
Thirty minute counter
A subsidiary dial on a chronograph that can time periods of up to 30 minutes.
A device for registering intervals of time with out any indication of the time of day.
A metal with a silvery appearance that is stronger and lighter than steel. Titanium is used increasingly in watchmaking, especially for sports and divers watches as it is resistant to salt water corrosion.
A tonneau watch is shaped like a barrel with two convex sides.
A mechanism that keeps track of and displays elasped time, often on a subsidiary dial.
A tourbillon is found in mechanical watches and is a device that eliminates timekeeping errors caused by the small differences in the rates a watch runs in the vertical positions. It consists of a round cage, holding the balance and escapement. It rotates continuously at the rate of one rotation per minute.
Uni-directional rotating bezel
A bezel that can be rotated in one direction only and is used to monitor elapsed time. A ratchet mechanism is often in place to prevent it rotating in the other direction. It is found on diverï¿½s watches to prevent the diver from running out of air by overestimating remaining air supply if the bezel is accidentally knocked off its position. The fact the bezel moves in one direction only means the diver can only underestimate remaining air supply.
This refers to the movement of a watch balance rotating back and forth. The balance of a mechanical watch usually vibrates at a rate of five or six times a second.
The ability of a watch to withstand water ingress to various pressures, as specified by the manufacturer.
This is the action of tightening the mainspring of a watch. It can be done manually, by means of the crown, or automatically, via a rotor which is made to swing by the movement of the wearer's wrist.
The winding stem connects the rotation of the watch crown to the movement of the watch, allowing the time and date to be set and, if mechanical/automatic, the watch to be manually wound.
World time dial
A dial that tells the time of up to 24 time zones around the world. The names of the cities are printed on the dial. The hour in a particular zone can be read by looking at the scale next to the city that the hour hand is pointing to. The minutes are read in the normal way. The dial is usually found on the outer edge of the watch face. Watches with this function are called world timers.
A countdown time which shows or sounds warning signals during the countdown to a boat race.